SPECIFICATIONS
Category: 1/8 Buggy and Truggy
Displacement [cm^3]: 3,5
Bore [mm]: 16,24
Stroke [mm] 16,8
Inlet ports: 5
Outlet ports: 1
Crankshaft: carbon steel
Backplate: aluminum
Front ball bearing: 7x19x6 rubber seal Rear ball bearing: 14×25,4×6 Swiss made steel
Carburetor diameter [mm]: 7.0 stock (6.0, 6.5, 7.5 and 8.0 optional)
Carburetor: VCX2-A aluminum, 2 needles, GEN2
Weight [g]: 345
Fuel consumption: >9:00 min
Engine temperature: 110-130°C (depending on air temperature)
Recommended Glow plug: REDS TS3
Recommended pipe: REDS 2143 + M Manifold or 2143 X-One pipe
Recommended fuel: 25-30% nitro, 8-10% oil
Break-in fuel: 12% oil